PVC-O管材双轴取向工艺PLC控制系统的设计

简述了PVC-O管材的生产方法.结合PVC-O管材一步加工法的生产特点,开发了PVC-O管材双轴取向工艺的PLC控制系统.阐述了该控制系统的设计方案及控制方法.     

Core–shell NTC materials with low thermal constant and high resistivity for wide-temperature thermistor ceramics

Core–shell structures have been proposed to improve the electrical properties of negative-temperature coefficient (NTC) thermistor ceramics. In this work, Al₂O₃-modified Co_1.5Mn_1.2Ni_0.3O₄ NTC thermistor ceramics with adjustable electrical properties were prepared through citrate-chelation followed by conventional sintering. Co_1.5Mn_1.2Ni_0.3O₄ powder was coated with a thin Al₂O₃ shell layer to form a core–shell structure. Resistivity (ρ) increased rapidly with increasing thickness of the Al₂O₃ layer, and the thermal constant (B) varied moderately between 3706 and 3846 K. In particular, Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ ceramic with 0.08 wt% Al₂O₃ showed the increase of ρ double, and the change in its B was less than 140 K. The Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ NTC ceramics showed high stability, and their grain size was relatively uniform due to the protection offered by the shell. The aging coefficient of the ceramic was less than 0.2% after aging for 500 hours at 125°C. Taken together, the results indicate that as-prepared Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ NTC ceramics with a core–shell structure may be promising candidates for application as wide-temperature NTC thermistor ceramics.     

Choice Behavioral Model of Shared Bicycle: An Empirical Study Based on SEM

Wireless Personal Communications - The purpose of this study is to construct a structural equation model of shared bicycle added psychological factors proceeding from the theory of planned...     

摇摆运动下多环路主冷却剂系统自然循环流量的稳定性分析

海洋核动力平台因其突出的安全性已成为当今核能领域热点研究问题之一，但在海洋等非惯性条件下会使一回路系统的热工特性发生变化。针对此问题，本文对几种典型的一回路系统在摇摆条件下的自然循环流量波动特性进行计算分析。分别建立典型的双环路、三环路、四环路的一回路系统模型布置方案，并同时考虑摇摆中心的位置，根据流体动量守恒方程，得到不同状态下一回路系统内的流量变化规律。对于单堆双环路系统，摇摆中心在船上/中/下部位置时，环路流量波动幅度分别为13.2%/11.2%/9.5%，堆芯流量波动幅度分别为0.9%/0.8%/0.6%；对于单堆三环路系统，摇摆中心在船下部时，环路流量和堆芯流量波动幅度分别为9.2%和0.8%；对于单堆四环路系统，摇摆中心在船下部时，布置方案1和方案2的环路流量波动幅度分别为9.5%和9.2%，堆芯流量波动幅度分别为0.9%和0.7%。计算结果表明：采用单堆双环路的设计布置方案是最有利于系统稳定性的。     

Robotic hand system design for mirror therapy rehabilitation after stroke

Microsystem Technologies - This paper developed a robotics-assisted device for the stroke patients to perform the hand rehabilitation. Not only the system can perform passive range of motion...     

盐酸氨溴索有关物质的合成

为控制盐酸氨溴索质量,以外购的有关物质E(2-氨基-3,5-二溴苯甲醛)为起始原料,合成了4个有关物质:2-氨基-3,5-二溴苯甲醇(有关物质A)、反式-4-(6,8-二溴-1,4-二氢喹唑啉-3(2H)-基)环己醇(有关物质B)、反式-4-[[(E)-2-氨基-3,5-二溴苯亚甲基]氨基]环己醇(有关物质C)和顺式-4-[(2-氨基-3,5-二溴苯甲基)氨基]环己醇(有关物质D),通过~1HNMR、~(13)CNMR和MS对产物结构进行了确证,并优化了醛胺缩合和还原反应条件。合成的这4个有关物质可作为盐酸氨溴索质量控制的杂质对照品。     

13％甲维盐·二卤代吡唑酰胺微乳剂的制备

为制备高效药剂13%甲维盐·二卤代吡唑酰胺微乳剂,对配方中的溶剂、防冻剂、乳化剂和水质进行研究,最终确定13%甲维盐·二卤代吡唑酰胺微乳剂最优配方为:8%的甲维盐,5%的二卤代吡唑酰胺,10%的N-甲基吡咯烷酮,15%的碳酸二甲酯及22%的乳化剂800号,自来水补足100%.通过最优配方所制备的甲维盐·二卤代吡唑酰胺微乳剂各项性能良好,符合标准要求.室内毒力实验表明,药剂杀小菜蛾的高峰时间为第2 d前后,并且对其有显著的防治效果.13%甲维盐·二卤代吡唑酰胺微乳剂应用鳞翅目蔬菜害虫防治,具有良好的药效和应用前景.